DMCC 5. Education Trainings & Internships Held

PowerFactory and System Studies Training & Internship

One of our Clients-care strategy of DMCC is to develop and deliver high-quality trainings in power system simulation and studies for capacity building at our Clients.

The trainings held by DMCC since 2007:

  • Training session on industrial power supply system simulation and arc-flash hazard analysis for Electrical System Owners of the Procter and Gamble Corporation’s industrial plants in Ukraine and Russia. April 2007.
  • Training sessions for electrical engineers on distribution system numerical protection, connection rules, electricity tariff and energy metering systems (ASKUE), November 2007.
  • Weekly training on the modelling and protection coordination of 0,4/6 kV network of the emergency power supply (BN-600 unit auxiliaries) of the Beloyarsk nuclear power plant (BNPP, Russian Federation) using DIgSILENT Power Factory software, June 2009.
  • Training on Introduction to PowerFactory for network planners of TSO NPC Ukrenergo, December 2011.
  • Five days training on PowerFactory Basics for six engineers of AES-Kyivoblenergo, 2012.
  • Training on power systems simulation for nine DSO DTEK-Donetskobleenergo engineers, June 2013.
  • Training on FACTs (SVC) simulation in PowerFactory in Crimea, July 2013.
  • Training on dynamic model development for CKRM (Russia), March, December 2013.
  • Basic PowerFactory Training for TSO NPC Ukrenergo, August 2014.
  • Advanced PowerFactory Training for TSO NPC Ukrenergo, September 2014.
  • Training on CDU->DGS data converter and TTC calculation by using in-house developed scripts, November 2014.
  • Training for specific equipment dynamic model development for ZTR, February 2015.
  • Two days PowerFactory presentation and training for Kirgizstan TSO, December 2015.
  • Training on PowerFactory for dynamic analysis of power system under the support of USAID/USEA program, November 2015.
  • Trainings on power oscillation damping, eigenvalues analysis and oscillation stability studies in PowerFactory, August 2016.
  • Trainings on renewables connection studies in PowerFactory for TSO NPC Ukrenrego under EBRD supported project, July 2016.
  • Training on distribution network analysis using PowerFactory software to the utility company DNO KievOblEnergo, March 2016.
  • Basic PowerFactory Training for DNO EnergoPro Georgia, April 2017.
  • Training on Energy losses & Short circuit studies for DNO EnergoPro Georgia, May 2017.
  • Basic PowerFactory Training for TSO NPC Ukrenrego, June 2017.
  • Training on Distribution system optimization & Renewables connection for DNO EnergoPro Georgia, July 2017.
  • Advanced (system stability) PowerFactory Training for TSO NPC Ukrenrego, July, August 2017.
  • Training on Reliability analysis (SAIFI, SAIDI, ENS) for DNO EnergoPro Georgia, August 2017.
  • Training session on PowerFactory for power systems analysis for TSO KEGOC, Kazakhstan, September-October, 2017.
  • Training on relay protection simulation in PowerFactory for TSO NPC Ukrenrego, October 2017.
  • Training on special protection schemes (SPS) logic and simulation for Southern regional dispatching Centre of Ukraine, November 2017.
  • 3 Trainings on PowerFactory basics plus renewables integration/power quality/protection, Kyiv, March-June, 2018.
  • 5 Trainings on PowerFactory basics plus distribution and transmission grid optimization, system stability and protection simulation in Dushanbe, May-September, 2018 and in Kyiv, December 2018.  
  • Training on Power systems optimisation for National Dispatching Center in Mongolia, Ulaanbaatar, December 2018.
  • Trainings on PowerFactory software applications for grid studies for CDC-Energia and Uzbekenergo in Tashkent, January, February and March 2019.
  • Training on DIgSILENT interfaces for GIS and SCADA (DGS) for Ukrenergo IT team in the frame of ENTSO-E DACF/IDCF software solution in Kyiv, April 2019
  • Five days trainings on PowerFactory Basics, Advanced Functions, Protection and Renewables in Kyiv, June-September, 2019.
  • Trainings on Power Factory basics, Calculation and optimization of transmission networks, Contingency analyses, Quasi-dynamic modelling, Steady-state and dynamic stability for system planners of National Electric Network of Kyrgyzstan, Bishkek, Kyrgyzstan, October-November-December, 2019.
  • Trainings on Power Factory basics, Quasi-Dynamic Simulation and Network Reduction for Academic Teaching and Research Staff of Almaty University of Energy and Communications (AUES), Almaty, Kazakhstan, October-November, 2019.
  • Training on Steady-state and dynamic stability in Power Factory for consultants and experts of Energy System Researches (ESR), Almaty, Kazakhstan, November, 2019.
  • PowerFactory training on Stability Studies to KEGOC's planners in Nur-Sultan, Kazakstan, December 2019.
  • Third training on the integration of renewable generation and protection simulation for Academic Teaching and Research Staff of Almaty University of Energy and Communications (AUES), Almaty, Kazakhstan, January 2020.
  • The first PowerFactory training on network planners of TSO Moldelectrica, Chisinau, Moldova, January 2020.

     

The internships held by DMCC since 2016:

  • Internship program on system stability studies of Dniprovsky cascade hydropower plants for TSO NPC Ukrenrego under support of USAID/USEA program, September – December 2016.
  • Internship program on system stability studies of Dniprovsky cascade hydropower plants for TSO NPC Ukrenrego under support of USAID/USEA program, January – March 2017.
  • Internship on Network Modelling & Load Flow Study in PowerFactory for DNO EnergoPro Georgia, April 2017.
  • Internship on Energy losses & Short circuit studies for DNO EnergoPro Georgia, June 2017.
  • Internship on Distribution system optimization & Renewables connection for DNO EnergoPro Georgia, July 2017.
  • Internship on Reliability analysis (SAIFI, SAIDI, ENS) for DNO EnergoPro Georgia, August 2017.
  • Internship session on PowerFactory applications for regional systems planning for TSO KEGOC, Kazakhstan, March-April, 2018.
  • Internship program on verification of dynamic models of AVRs, PSSs and GOVs of power plants for system stability studies of IPS of Ukraine integration with ENTSO-E under support of USAID/USEA, October 2018 – May 2019.
  • Internship on verification of dynamic models of Moldelectrica system, Chisinau, Moldova, February 2020.

     

The workshops and Knowledge exchange programs held by DMCC since 2011:

  • Workshops on SVC planning using online and offline simulation technologies (RTDS and PowerFactory) at Alstom Grid in Finland, 2011, 2012.
  • DMCC & Tractebel Engineering Workshop on Data and models exchange between Eurostag and PowerFactory, tuning load flow, Kyiv 2013.
  • DIgSILENT Representative Meeting, New PowerFactory 15 has been presented in Gomaringen, 2013.
  • DMCC & Tractebel Engineering Workshop on Transient stability and Eigenvalues (modal) analysis in Eurostag and PowerFactory in Brussels, 2014.
  • OPAL-RT's seminar on Real time simulation of large power systems. HIL, SIL and MIL technologies. Paris, December, 2014
  • Working group 1 (steady-state) and 2 (dynamic) regular meetings under the UMPSI-2015 project in Bucharest, Belgrade, Warsaw, Budapest and Gdansk, 2014-2015.
  • Presentation of stability system study (UPSSP project of USAID/USEA), Sofia, October 2015.
  • Presentation of PF applications (EnergyLinks project of USAID/ECODIT), Bishkek, December 2015.
  • Presentation of PF applications for KEGOC (with DGS) in Astana, May, 2016.
  • Presentation of DMCC services at the 1st International Workshop on Electrical and Computer Engineering at Cracow University of Technology, Faculty of Electrical and Computer Engineering in Poland, 22-23 May 2017.
  • Workshop on Steady-State Model Development & DMCC Scripts Installation for KEGOC (with DGS) in Astana, May 2017.
  • Workshop on Steady-State & Dynamic Grid Model Testing for KEGOC in Astana, July 2017.
  • Workshop and User Acceptance Tests for Steady-State & Dynamic Grid Model for KEGOC (with DGS) in Astana, August 2017.
  • Workshop on Grid Code amendment and model validation to study renewables integration for GSE (with DGS) in Tbilisi, February 2018.
  • Workshops on preliminary results system study for renewables integration in GSE grid, Gomaringen-Kyiv, May 2018.
  • Workshop on energy losses calculation and minimization in Dushanbe, November 2018.
  • Workshops on the final results of the project on system studies for renewables integration in GSE grid, Tbilisi, November 2018.
  • Workshop on DACF/IDCF software solution at Ukrenergo, March 2019.
  • Two Workshops for advanced using of PowerFactory for PamyrEnergy, Dushanbe-Kyiv, April-May, 2019
  • Regional workshop on utilisation of the PowerFactory software model of the Central Asia Power System (CAPS) Grid in CDC Energia in Tashkent, June 2019 
  • Workshops on transient stability studies and quasi dynamic simulation for renewables integration study in Uzbekistan, in Tashkent, August 2019